RESINS. PYROLYSIS OF GOSSYPOL RESIN

RESINS. PYROLYSIS OF GOSSYPOL RESIN

Authors

  • T.K. Akilov M. Auezov South Kazakhstan University, Shymkent, Kazakhstan
  • A.M. Azimov M. Auezov South Kazakhstan University, Shymkent, Kazakhstan
  • N.N. Issabayev M. Auezov South Kazakhstan University, Shymkent, Kazakhstan
  • T.A. Imangaliyev M. Auezov South Kazakhstan University, Shymkent, Kazakhstan
  • N.M. Daurenbek M. Auezov South Kazakhstan University, Shymkent, Kazakhstan
  • B.B. Turakulov M. Auezov South Kazakhstan University, Shymkent, Kazakhstan

DOI:

https://doi.org/10.55956/RDOT4107

Keywords:

pyrolysis, gossypol resin, spectrometry, component, microscopy

Abstract

The article provides a brief overview of resins, i.e. types of resins, their origin and use in production and technology. Physico-chemical properties of gossypol resin are also given. In the lubrication process, gossypol resin is used as anti-corrosion agents and additives. Pyrolysis of gossypol resin was carried out in a laboratory experimental unit with heat treatment in the temperature range of 100-500℃. The composition of gossypol resin was determined using IR spectrometry and scanning electron microscopy. It was observed that gossypol resin mainly consists of impurities separated by four complex fractions. The first is aqueous, the second is fatty acid fractions, the third is nitrogen-containing cyclic pyridine and trans isomers, and the fourth is phase. 

Downloads

Published online

2024-12-30

Issue

No. 4(86) (2024)

Section

Chemical Technologies

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.