SOME PROPERTIES OF POLYMERMINERAL COMPOSITIONSBASED ON THERMOSETTING RESINS

SOME PROPERTIES OF POLYMERMINERAL COMPOSITIONSBASED ON THERMOSETTING RESINS

Authors

  • S.K. Nurpeissov azakh National University of Water Management and Irrigation, Taraz, Kazakhstan
  • A.K. Medetov Kazakh National University of Water Management and Irrigation, Taraz, Kazakhstan
  • N.T. Karabaev Kazakh National University of Water Management and Irrigation, Taraz, Kazakhstan
  • A.B. Turmakhanbetova Kazakh National University of Water Management and Irrigation, Taraz, Kazakhstan
  • B.A. Karymsakov Kazakh National University of Water Management and Irrigation, Taraz, Kazakhstan

DOI:

https://doi.org/10.55956/ZAOM5200

Keywords:

polymermineral composition, resin, hardener, filler, macrophase, packaging, hyperiz

Abstract

The compositions of polymer-mineral compositions based on polyester and epoxy resins are presented, blast furnace and granulated phosphorous slags are used as optimal fillers. Optimal compositions and properties of polymer composite materials have been obtained. The influence of the chemical composition of the fillers on the strength characteristics and curing modes of the compositions has been determined. The resulting compositions are recommended as filler compounds in the repair of reclamation and hydraulic structures, as well as as binders in the production of high-strength, durable materials – polymer concrete.

Downloads

Published online

2025-06-30

Issue

No. 2(88) (2025)

Section

Constuction Technologies

License

Copyright (c) 2025

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.